Rich port types, 24 x 1000 Mbps Ethernet ports, 4 x 10G optical ports for uplink
IEEE 802.3af and IEEE 802.3at compliant, PoE+ supported
VSU virtualization, flexible networking and high performance
Network security policies and real-time monitoring, delivering enhanced network robustness
Multiple management modes, simplified and easy network maintenance

Key Specification
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Key Specification View More

Features

Layer 3 Access Switch for 10G Uplink RG-S5310-24GT4XS-P-E

Full-gigabit access switch for large-sized enterprise and campus LANs, with four 10G uplink optical ports for high-speed data transmission 24 x 1000 Mbps Ethernet ports with auto-negotiation, PoE+ supported, providing high-speed network experience for short-distance services

PoE+ Supported, Powering Different Terminal Devices

The switch automatically detects and supplies the required power for powered devices, providing up to 15.4 W for IEEE 802.3af-compliant devices, or up to 30 W for IEEE 802.3at-compliant devices, meeting the requirements of common PoE applications such as security surveillance, teleconferencing, and wireless coverage.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

The VSU connects to peripherals through an aggregate link, realizing service switching in milliseconds upon a failure.

VSU virtualization technology is supported to increase bandwidth through link aggregation, which greatly improves forwarding capabilities of the switch.

Multiple physical switches can be virtualized into one logical unit to simplify network configuration and architecture, eliminating loops, and improving reliability.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPU Protect Policy (CPP) is supported to control the packet type and traffic volume sent to the CPU to prevent high CPU usage. Network Foundation Protection Policy (NFPP) is supported to isolate users with attacker behaviors to ensure network security and stability.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and
configuration after it accesses the all-optical network, achieving
plug and play, no commissioning and fast onboarding.

A switch can be flexibly replaced based on service needs
without reconfiguration. Service ports supports auto-sensing,
achieving automatic O&M.

Fast Onboarding

Zero Touch Replacement

Specifications

Hardware Specifications

Port specifications	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E	RG-S5310-24GT4XS-P-E	RG-S5310-48GT4XS-P-E
Fixed service port	24 x 10/100/1000BASE-T ports 4 x 1GE/10GE SFP+ ports	48 x 10/100/1000BASE-T ports 4 x 1GE/10GE SFP+ ports	24 x 1GE SPF ports 4 x 1GE/10GE SFP+ ports	48 x 1GE SPF ports 4 x 1GE/10GE SFP+ ports	24 x 10/100/1000BASE-T ports, supporting PoE/PoE+ 4 x 1GE/10GE SFP+ ports	48 x 10/100/1000BASE-T ports, supporting PoE/PoE+ 4 x 1GE/10GE SFP+ ports
Module slot	2 x power module slots
Power module	RG-PA150IB-F RG-PD150IB-F RG-PA70IB	RG-PA150IB-F RG-PD150IB-F RG-PA70IB	RG-PA150IB-F RG-PD150IB-F RG-PA70IB	RG-PA150IB-F RG-PD150IB-F	RG-PA600I-P-F RG-PA1000I-P-F	RG-PA600I-P-F RG-PA1000I-P-F
Fixed management port	1 x RJ45 console port 1 x RJ45 MGMT port
USB	1 x USB 2.0 port

System Specifications	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E	RG-S5310-24GT4XS-P-E		RG-S5310-48GT4XS-P-E
System packet forwarding rate *1	115 Mpps	158 Mpps	115 Mpps	158 Mpps		115 Mpps	158 Mpps
System switching capacity *2	154 Gbps	211 Gbps	154 Gbps	211 Gbps		154 Gbps	211 Gbps
CPU	Dual-core CPU, each core with the clock speed of 1.2 GHz
BootROM	16 MB
Flash memory	2 GB
Memory	1 GB
Switch buffer	3 MB
Number of MAC addresses	32,000
ARP table size	4,000/16,000 (authorized)
ND table size	2,000/8,000 (authorized)
Number of IPv4 unicast routes	8,000/12,000 (authorized)
Number of IPv4 multicast routes	2,500
Number of IPv6 unicast routes	4,000
Number of IPv6 multicast routes	1,200
Number of ACEs	Ingress: 3,500 Egress: 1,500
Number of IGMP groups	2,500
Number of MLD groups	1,000
Number of VSU members	4

*1 means the system's packet forwarding rate.

*2 means the system's switching.capacity.

Dimensions and weight	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E	RG-S5310-24GT4XS-P-E	RG-S5310-48GT4XS-P-E
Unit dimensions (W x D x H)	442.0 mm x 420.0 mm x 43.6 mm (17.40 in. x 16.56 in. x 1.72 in.)
Shipping dimensions (W x D x H)	570.0 mm x 565.0 mm x 172.0 mm (22.44 in. x 22.24 in. x 6.77 in.)
Rack height	1 RU
Unit weight	4.0 kg (8.82 lbs)	4.3 kg (9.48 lbs)	4.2 kg (9.26 lbs)	4.5 kg (9.92 lbs)	4.3 kg (9.48 lbs)	4.6 kg (10.14 lbs)
Shipping weight	6.20 kg (13.67 lbs)	6.50 kg (14.33 lbs)	6.38 kg (14.07 lbs)	6.58 kg (14.51 lbs)	6.78 kg (14.95 lbs)	6.69 kg (14.75 lbs)

Power supply and consumption	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E
Power supply	2 x pluggable power modules
Power module redundancy	1+1 redundancy
Power input	RG-PA150IB-F (AC input) ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AV to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 3 A RG-PD150IB-F (DC input): ● Rated input voltage: –48 V DC to –60 V DC ● Maximum input voltage: –36 V DC to –75 V DC ● Maximum input current: 5 A
Power input	RG-PA70IB (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 2 A			/
Maximum output power	RG-PA70IB: 70 W RG-PA150IB-F: 150 W RG-PD150IB-F: 150 W			RG-PA150IB-F: 150 W RG-PD150IB-F: 150 W
Maximum power consumption	40 W	55 W	85 W	108 W

Power supply and consumption	RG-S5310-24GT4XS-P-E	RG-S5310-48GT4XS-P-E
Power supply	2 x pluggable power modules
Power module redundancy	Only when the PoE load of the whole device is less than PoE output power of single power supply and dual power supplies are used, redundancy is supported.
Power input	RG-PA600I-P-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1000I-P-F (AC input 1): ● Rated input voltage: 100 V AC to 130 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz ● Maximum input current: 12 A RG-PA1000I-P-F (AC input 2): ● Rated input voltage: 200 V AC to 240 V AC, 50 Hz to 60 Hz ● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A
Maximum output power	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: ● 100 V AC to 130 V AC: 930 W ● 200 V AC to 240 V AC: 1000 W
PoE port	All RJ45 ports support PoE/PoE+ (IEEE802.3af/at) power supply
PoE power cable pairs	Mode A (1-2, 3-6 pairs)
PoE output power	Each PoE port provides up to 30 W of power. The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W; 1 x RG-PA1000I-P-F: 740 W; 2 x RG-PA1000I-P-F: 1480 W; a maximum output of 720 W over 24 ports (30 W x 24)	Each PoE port provides up to 30 W of power. The maximum power depends on the configured power supply. ● 1 x RG-PA600I-P-F: 370 W ● 2 x RG-PA600I-P-F: 740 W ● 1 x RG-PA1000I-P-F: 740 W ● 2 x RG-PA1000I-P-F: 1480 W; a maximum output of 1440 W over 48 ports (30 W x 48)
Maximum power consumption	65 W (without PoE load) 810 W (full PoE load)	75 W (without PoE load) 1,570 W (full PoE load)

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Environment and reliability	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E	RG-S5310-24GT4XS-P-E	RG-S5310-48GT4XS-P-E
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) Operating altitude: 0 m to 5,000 m ( 0 ft. to 16,404.20 ft.)
Mean time between failure (MTBF)	385,440 hours (about 44 years, dual power modules) 210,240 hours (about 24 years, single power module)	350,400 hours (about 40 years, dual power modules) 201,480 hours (about 23 years, single power module)	306,600 hours (about 35 years, dual power modules) 183,960 hours (about 21 years, single power module)	289,080 hours (about 33 years, dual power modules) 175,200 hours (about 20 years, single power module)	350,400 hours (about 40 years, dual power modules) 201,480 hours (about 23 years, single power module)	306,600 hours (about 35 years, dual power modules) 183,960 hours (about 21 years, single power module)
Fan	1 x fixed fan module		2 x fixed fan modules		1 x fixed fan module
Heat dissipation	Fan cooling, left-to-right and front-to-right airflow
Acoustic noise	27°C (80.6°F): 34.3 dB 45°C (113°F): 56.5 dB	27°C (80.6°F): 40.8 dB 45°C (113°F): 52.4 dB	27°C (80.6°F): 38.9 dB 45°C (113°F): 53.7 dB	27°C (80.6°F): 38.9 dB 45°C (113°F): 53.7 dB	27°C (80.6°F): 51.6 dB 45°C (113°F): 57.4 dB	27°C (80.6°F): 51.6 dB 45°C (113°F): 58.3 dB
Power module hot swapping	Supported
USB hot swapping	Supported
Cable hot swapping	Supported by all ports
Power supply monitoring	Monitoring of power supply model and status Power supply failure alarming
Fan monitoring	Fan speed adjustment: 3 levels Fan failure alarming
Temperature monitoring	Temperature monitoring, over-temperature alarming If the ambient temperature exceeds a certain value, the device will be reset.
ESD	Air discharge: 8 kV Contact discharge: 6 kV
Surge protection	MGMT port: 4 kV Service port: 10 kV Power port: common mode 6 kV, differential mode 6 kV

Certifications and regulatory compliance	RG-S5310-24GT4XS-E	RG-S5310-48GT4XS-E	RG-S5310-24SFP4XS-E	RG-S5310-48SFP4XS-E	RG-S5310-24GT4XS-P-E	RG-S5310-48GT4XS-P-E
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
RoHS	European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Software Specifications

Feature	RG-S5310-E Series
Ethernet Switching	IEEE 802.1Q (supporting 4K VLANs)
	Jumbo frame (maximum length: 9,216 bytes)
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	Super VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	Auto errdisable recovery BPDU filter BPDU guard Port fast Root guard
	ERPS (G.8032)
	LLDP/LLDP-MED, LLDP IPv6, and LLDP-POE
IP Service	Static and dynamic ARP, ARP proxy, and ARP entry timeout
	DHCP client, DHCP relay, DHCP server, and DHCP snooping
	DHCPv6 client, DHCPv6 relay, DHCPv6 server, and DHCPv6 snooping
	DNS client, DNS proxy, and DNSv6 client
	MAC address filtering Setting the MAC address aging time
	Neighbor Discovery (ND), ND proxy, and ND snooping
	GRE tunnel
IP Routing	IPv4 and IPv6 static routing
	RIP and RIPng
	OSPFv2, OSPFv3, and GR
	IS-ISv4 and IS-ISv6
	BGP4 and BGP4+
	IPv4/IPv6 VRF
	IPv4/IPv6 PBR
Multicast	IGMPv1/v2/v3
	IGMPv1/v2 snooping
	IGMP fast leave
	PIM-DM, PIM-SM, PIM-SSM, PIM SMv6, and PIM-SSMv6
	MSDP for inter-domain multicast
	MLDv1/v2 and MLD proxy
	MLDv1/v2 snooping
	PIM-SMv6
	Multicast source IP address check Multicast source port check
	Multicast querier
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	Time based ACLS, ACL 80, and IPv6 ACL
	Global ACLs
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p/DSCP/ToS traffic classification
	Congestion management: SP, WRR, DRR, WFQ, SP+WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Eight priority queues per port
	Rate limiting in each queue
Security	Multiple AAA modes
	RADIUS authentication and authorization
	RADIUS and TACACS+
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMPv6
	Port security
	IP source guard
	SAVI
	ARP spoofing prevention
	CPP and NFPP
	Multiple attack defense functions
	3-tuple binding (IP address, MAC address, and port) 3-tuple binding (IPv6 address, MAC address, and port) Filtering of invalid MAC addresses Port- and MAC address-based 802.1x authentication MAB authentication Portal authentication and Portal 2.0 authentication ARP check DAI ARP packet rate limiting Gateway ARP spoofing prevention Broadcast storm suppression Hierarchical management of administrators and password protection BPDU guard Port protection
Reliability	REUP
	RLDP
	RLDP, Layer 2 link connectivity detection, and unidirectional link detection
	DLDP
	IPv4 VRRP v2/v3, IPv6 VRRP, and super-VLAN for VRRP
	BFD, RAS, NSR, VRRR, VRRP+, and SDN loop detection
	Basic LACP Inter-VSU AP
	Link monitoring, fault notification, and remote loopback based on 802.3ah (EFM)
	Hot swapping of power modules
Device virtualization	VSU Local and remote stacking Inter-chassis link binding in a stack Virtualization through standard service interfaces
NMS and maintenance	RSPAN and ERSPAN
	sFlow
	NTP client, NTP server, NTPv6 client, and NTPv6 server
	SNTP
	CLI (Telnet/Console)
	FTP client, FTP server, FTPv6 client, and FTPv6 server
	TFTP client, TFTP server, TFTPv6 client, and TFTPv6 server
	FTP and TFTP
	SNMP v1/v2/c3
	Web
	Syslog/Debug
	RMON (1, 2, 3, 9) Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups RMON used to implement Ethernet statistics, historical statistics, and alarm functions
	NETCONF
	MACC
	CWMP
	gRPC
	OpenFlow Special 1.3 Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	RNS, configuration rollback, and 802.3ah
	1:1 mirroring N:1 mirroring 1:N mirroring Flow-based local and remote mirroring
VXLAN	VXLAN (authorized)
PoE	RG-S5310-24GT4XS-P-E and RG-S5310-48GTXS-P-E: IEEE 802.3af and 802.3at power supply standards Automatic and energy-saving power supply management modes Uninterrupted power supply in hot start mode Scheduled power-on or power-off of PoE ports based on the time policy Port priority

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Order Information

Switches

Model	Description
RG-S5310-24GT4XS-E	24 x 10/100/1000BASE-T ports, 4 x 1GE/10GE SFP+ ports
RG-S5310-48GT4XS-E	48 x 10/100/1000BASE-T ports, 4 x 1GE/10GE SFP+ ports
RG-S5310-24SFP4XS-E	24 x 1GE SFP ports, 4 x 1GE/10GE SFP+ ports
RG-S5310-48SFP4XS-E	48 x 1GE SFP ports, 4 x 1GE/10GE SFP+ ports
RG-S5310-24GT4XS-P-E	24 x 10/100/1000BASE-T ports, supporting PoE/PoE+ and the maximum PoE output power of 740 W, 4 x 1GE/10GE SFP+ ports,
RG-S5310-48GT4XS-P-E	48 x 10/100/1000BASE-T ports, supporting PoE/PoE+ and the maximum PoE output power of 1440 W, 4 x 1GE/10GE SFP+ ports

Note:

4 x 1GE/10GE SFP+ ports support 1GE SFP transceivers and10GE SFP+ transceivers.

Power Module

Model	Description
RG-PA70IB	70 W AC power module
RG-PA150IB-F	150 W AC power module
RG-PD150IB-F	150W DC power module
RG-PA600I-P-F	600 W AC power module, PoE power module
RG-PA1000I-P-F	1,000 W AC power module, PoE power module

License

Model	Description
RG-VXLAN-MPLS-ENTRY-LIC	S5310E series, software license for VXLAN, MPLS, routing table, and ARP table

Optical Transceivers

1GE

Model	Description
Mini-GBIC-GT	1000BASE-X to 1000BASE-T, copper SFP transceiver, RJ45, 100 m over Cat 5e/6/6a The port needs to be configured with auto-negotiation
Mini-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
Mini-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
Mini-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
GE-SFP-LX20-SM1310-BIDI	1000BASE-LX, SFP transceiver, Tx1310/Rx1550, BiDi LC, 20 km over SMF
GE-SFP-LX20-SM1550-BIDI	1000BASE-LX, SFP transceiver, Tx1550/Rx1310, BiDi LC, 20 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, Tx1310/Rx1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, Tx1550/Rx1310, BiDi LC, 40 km over SMF
GE-SFP-LX03-SM1310-BIDI-I	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
GE-SFP-LX03-SM1550-BIDI-I	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.

10GE

Model	Description
XG-SFP-T	10GBASE-T, copper SFP+ transceiver, RJ45, 100 m over Cat 6a/7
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-ER-SM1550	10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF
XG-SFP-LR10-SM1270-BIDI-I	10GBASE-ZR, SFP+ transceiver, 1550nm, Duplex LC, 80 km over SMF
XG-SFP-LR10-SM1330-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1270/RX1330, BiDi LC, 10 km over SMF
XG-SFP-AOC1M	10GBASE-LR, SFP+ transceiver, TX1330/RX1270, BiDi LC, 10 km over SMF
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-LR10-SM1270-BIDI-I	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-S5310-24GT4XS-P-E 24-Port GE Electrical Layer 3 Managed Access Switch with PoE+, Four 10G Uplink Ports